유기 실리콘 화학물질
-
100% Hydroxy-Terminated Silicone Fluid For Advanced Silicone Rubber Structure Preparation
Hydroxy-Terminated Silicone Fluid for Advanced Silicone Rubber Structure Preparation Product Description Hydroxy terminated silicone fluid for Silicone rubber structure preparation Specification Appearance Colorless transparent Liqud Hydroxyl Content(%) 0.02-3(directly related to Viscosity) ...
-
비디오
중국 우한 공장 공급 고품질 100% 실리콘 오일 CAS:63148-62-9 디메틸,5cst,20cst,50cst,350cst,1000cst.etc
high viscosity dimethy silicone oil manufacturers 300000 cas 63148-62-9 fungsi watter repellent coatings 300000 CAS 63148-62-9 High Viscosity Dimethyl Silicone Oil for Water Repellent Coatings Product Description Index item Viscosity (25°C) Mpa.s Flash point (°C,≥)kg Density (25°C)g/cm3 Volatile ...
-
비디오
밝은 화학물질 메틸 실리콘 오일 서버 전자 및 배터리 몰입 냉각
Boiling Point 101 °C lit. Silicone Oil for Server Electronics and Battery Immersion Cooling Product Description Product Specifications Viscosity Appearance Flash Point(℃) Freezing Point (℃) Specific Gravity 25℃ VISCOSITY TEMP COEFFICIENT 1 cst transparent liquid ≥300 -39 0.92 0.48 5 cst transparent ...
-
350cst 디메틸 실리콘 에뮬션 오일 타이어 / 대시 보드 / 가구
dimethyl silicone emulsion oil as tyre/dash board/furniture/rubber polish mould release agent 350cst Dimethyl Silicone Emulsion Oil for Tyre/Dash Board/Furniture/Rubber Polish Mould Release This Silicone Emulsion is a 60% active emulsion that is comprised of 350CST Polydimethylsiloxane (CAS No. ...
-
100cst 200cst 350cst 500cst 1000cst 다이메틸 실리콘 액체 PDMS 9006-65-9
Textile Auxiliary Agents PDMS 100cst 200cst 350cst 500cst 1000cst Dimethyl Silicone Fluid 9006-65-9 Product Description Product Specifications Viscosity Appearance Flash Point(℃) Freezing Point (℃) Specific Gravity 25℃ VISCOSITY TEMP COEFFICIENT 1 cst transparent liquid ≥300 -39 0.92 0.48 5 cst ...
-
CAS 번호 63148-62-9 실리콘 오일 350 최종 용액 메틸 실리콘 액체
Silicone Oil 350 The Ultimate Solution for Chemical Auxiliary Agent Flash Point ≥315 Silicone oil 350 price Product Description Index item Viscosity (25°C) Mpa.s Flash point (°C,≥)kg Density (25°C)g/cm3 Volatile matter ≤(150℃, 3h)% freezing point ℃ 201-10 10 160 0.945-0.955 3 -65 201-50cs 50 200 0...
-
350cst 1000cst PDMS 실리콘 오일 CAS 63148-62-9 무색 액체
30. Wuhan Supply Silicone Oil CAS 63148-62-9 350cst Anti Foam Agent for Country Marke Product Description Dimethyl Polysiloxane 100% Silane / Siloxane Silicone Oil 10 / 50 / 100 / 350 CAS 63148-62-9 Index item Viscosity (25°C) Mpa.s Flash point (°C,≥)kg Density (25°C)g/cm3 Volatile matter ≤(150℃, 3h...
-
순수성 페르플루로트리부티알라민 CAS 311-89-7 A 플루오린 용매
Perfluorotributylamine CAS 311-89-7 A Fluorinated Solvent for Industrial Applications Product Description Specification item value CAS No. 311-89-7 Other Names TRI(PERFLUOROBUTYL)AMINE MF 311-89-7 EINECS No. 206-223-1 Place of Origin China Hubei Grade Standard Industrial Grade Purity 98% Appearance ...
-
350cst 1000cst PDMS 실리콘 오일 / 63148-62-9 100% 머리에 쓰이는 무색 액체 오일 헤어 크림 헤어 살롱 헤어 고정제 및 화장품 산업의 자외선 차단제
350cst 1000cst PDMS Silicone Oil / 63148-62-9 100%Colorless Liquid,Used as head oil, hair cream, hair salon, hair fixing agent and sunscreen in the cosmetics industry, Sample available, Product Description Dimethyl Polysiloxane 100% Silane / Siloxane Silicone Oil 10 / 50 / 100 / 350 CAS 63148-62-9 ...
-
비디오
플루오리네르트 FC-43 페르플루로트리부티알라민 액체 95% 전자 냉각 성능
Product Description Fluorinert Electronic Liquid FC-43 Perfluorotributylamine(cas:311-89-7) Bright Chemical Factory supply 95%liquid Similiar Name: PERFLUORO-COMPOUND FC-43;PERFLUOROTRI-N-BUTYLAMINE;PERFLUOROTRIBUTYLAMINE;TRIS(NONAFLUOROBUTYL)AMINE;TRI(PERFLUOROBUTYL)AMINE;HEPTACOSAFLUOROTRIBUTYLAMI...
-
폴리디메틸실록산 알코올 애니온 에뮬션 고위 viskosity 활성 탄소 종류
Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos Product introduction Dimethiconol Emulsion is an anionic emulsion of very high viscosity polydimethylsiloxane for use in rich conditioning shampoos and with careful ...
-
화학 보조 물질 인 곰팡이 방출을 위한 흡수성 실리콘 에뮬션
Silicone emulsion for mold release Product introduction In the plastic mold manufacturing industry In order to facilitate demolding, improve efficiency, Extend mold life, make product surface smooth, Qualified size, reduce waste, A release agent is required. Among the most commonly used release ...
